Old Tank Removal and Disposal
We drain the old unit with a water heater drain pump, disconnect the water and gas or power, and haul it away. Disposal is included, so you're not stuck with a 150-pound tank in your garage or on the curb.
Licensed, insured, and warrantied work for Carroll County homes
Bradford White Water Heater Replacement in Carrollton
When your Bradford White water heater quits, you need hot water back fast. Our team handles Bradford White Water Heater Replacement in Carrollton with same-day service, code-correct work, and upfront pricing. We serve homeowners across Carroll County, from Downtown Carrollton to Indian Creek, and we stock the parts that fail most: anode rods, T&P valves, thermostats, and heating elements. Call (943) 469-0029 and we'll get your tank swapped before the day is done.
Careful work. Honest options.
About this service
What Bradford White Water Heater Replacement in Carrollton Involves
Bradford White Water Heater Replacement in Carrollton means removing your failed tank, disposing of it, and installing a new Bradford White unit that matches your home's gas or electric setup, venting, and gallon capacity. We drain the old tank with a water heater drain pump, cut out corroded nipples with a tube cutter, and rebuild connections using copper pipe or PEX tubing, brass fittings, and dielectric unions. Every job ends with a T&P valve test, a gas leak check on gas models, and a full cycle run to confirm the thermostat holds temperature.
Carrollton homes take a beating from hard water and temperature swings. Sediment buildup kills heating elements and corroded anode rods let tanks rust from the inside out. If you're searching for Bradford White water heater replacement near me, we cover Downtown Carrollton, Hebron, Castle Hills, and the 30117, 30116, and 30118 ZIP codes. The cost to replace Bradford White water heater in Carrollton GA depends on tank size and venting, but most jobs land in a predictable range we'll quote before we start.
- ✓ Same-Day Hot Water
- ✓ Code-Correct Every Time
- ✓ Upfront Pricing, No Surprises
- ✓ Warrantied Parts and Labor
What's included
What's Included in Bradford White Water Heater Replacement
Every Bradford White replacement we do in Carrollton includes the full job: removal, disposal, new tank, connections, and testing. Here's what's covered in the standard price and what we quote separately if your home needs it.
New Bradford White Tank
We supply a new Bradford White unit in the size and model that fits your home, typically a 40 or 50-gallon. Manufacturer warranty runs six to ten years depending on the model. We register the warranty for you.
Water and Gas Connections
We rebuild the connections with copper pipe or PEX tubing, brass fittings, dielectric unions, and a gas flex connector on gas models. Every threaded joint gets Teflon tape or pipe dope. Gas lines get a leak check.
Venting and Code Compliance
We verify venting against NFPA 54 and install to Uniform Plumbing Code and International Plumbing Code standards. That includes a working T&P valve and an expansion tank on closed systems. We pull permits where required.
Full Testing and Walkthrough
We fill the tank, run a full heating cycle, and check every connection for leaks. The T&P valve gets tested, the thermostat gets set, and we walk you through the settings and warranty paperwork before we leave.
How it works
Our Bradford White Replacement Process
Call (943) 469-0029 and we'll ask about the symptoms: leaking tank, no hot water, rusty water, popping noises, or a pilot light outage. That tells us whether you need a repair or a full replacement. We schedule a same-day or next-morning window and confirm the address, including your ZIP code.
A licensed plumber inspects the tank, checks the T&P valve, tests the thermostats with a multimeter, and looks at venting and gas connections. We measure the space, confirm whether a 40, 50, or 75-gallon unit fits, and give you a flat price before any work begins.
We shut off the gas or power, close the water supply, and drain the old tank with a water heater drain pump. Corroded fittings come off with a pipe wrench and tube cutter. We haul the old unit away and dispose of it properly, so you're not stuck with a 150-pound tank in your garage.
The new Bradford White goes in with dielectric unions, a gas flex connector on gas models, and Teflon tape or pipe dope on every threaded joint. We solder copper or crimp PEX tubing, set the expansion tank, and wire the thermostat and heating element on electric units. Venting gets checked against NFPA 54.
We fill the tank, run a full heating cycle, and check for leaks at every connection. The T&P valve gets tested, gas lines get a leak check, and we confirm the water hits temperature. Before we leave, we walk you through the settings and the warranty paperwork.
STEP 01Phone Diagnosis
Call (943) 469-0029 and we'll ask about the symptoms: leaking tank, no hot water, rusty water, popping noises, or a pilot light outage. That tells us whether you need a repair or a full replacement. We schedule a same-day or next-morning window and confirm the address, including your ZIP code.
Tools & methods
Tools and Methods We Use
Water heater drain pump
Moves 40 to 50 gallons of water out of the old tank quickly, so we're not waiting on gravity. Cuts drain time from 30 minutes to under 10.
Pipe wrench and tube cutter
Removes corroded nipples and cuts copper pipe cleanly for the new connections. Essential on older Carrollton homes with mineral buildup.
Soldering torch and flaring tool
Makes leak-free copper joints and flares gas lines where required. We use them on every copper repipe during a water heater swap.
Multimeter and T&P valve tester
Tests heating elements, thermostats, and the temperature and pressure relief valve. Confirms the new unit is working before we leave.
Dielectric unions and flexible connectors
Prevents electrolysis between copper and steel fittings, which extends the life of your new Bradford White tank.
Real results
Before and after.
Bradford White Water Heater Replacement
Leaking 50-Gallon Bradford White in Downtown Carrollton
A homeowner called at 3 p.m. with water pooling around a 13-year-old Bradford White tank. The bottom was rusted through and the T&P valve was dripping. They had no hot water and were worried about floor damage.
After: We drained the old tank, installed a new 50-gallon Bradford White, and replaced the T&P valve and expansion tank. Total job time was three hours. The homeowner had hot water by 6:30 p.m. and a dry floor.
Book this service →
Bradford White Water Heater Replacement
Failed Heating Element in a Hebron Rental
A landlord called about a tenant with no hot water. The Bradford White was eight years old and the lower heating element had burned out from sediment buildup. The tenant was threatening to withhold rent.
After: We tested the element and thermostat with a multimeter, confirmed the tank was otherwise sound, and replaced the element and thermostat the same day. Total cost was $340. The tenant had hot water back by evening.
Book this service →
Bradford White Water Heater Replacement
Upgrading a 40-Gallon to 50-Gallon in Castle Hills
A family of five kept running out of hot water with a 12-year-old 40-gallon Bradford White. The tank was still working but couldn't keep up with morning showers. They wanted more capacity without a major remodel.
After: We measured the space, confirmed the gas line could handle the larger unit, and installed a new 50-gallon Bradford White. The swap took four hours. The family now has enough hot water for back-to-back showers.
Book this service → Problems we solve
Problems We Solve with Bradford White Water Heater Replacement in Carrollton
Most Bradford White tanks fail the same way: rust, sediment, or a bad valve. Here's what we see on Carrollton calls and how we fix it.
Ask a pro →Leaking tank flooding the floor
We shut off the water, drain the tank, and install a new Bradford White the same day. We check the T&P valve and expansion tank while we're there. Most leaking tank calls in Carrollton get hot water back within four hours.
No hot water from a failed heating element
We test the element and thermostat with a multimeter. If the tank is otherwise sound, we replace the part. If it's rusted or over ten years old, we swap the whole unit for a new Bradford White.
Rusty water and corroded anode rod
We inspect the anode rod during every service call. If the tank is still under warranty and the rod is the only issue, we replace it. If the liner is compromised, we install a new Bradford White before it bursts.
Popping noises and sediment buildup
We drain and flush the tank to clear sediment. If the buildup is severe or the tank is old, we replace it. Carrollton's hard water makes annual flushing worth it.
Transparent pricing
Bradford White Water Heater Replacement Cost in Carrollton
$1,150 - $2,200+ depending on tank size, model, and venting
Typical 2026 pricing for Bradford White water heater replacement in Carrollton runs $1,150 to $1,850 for a standard 40 or 50-gallon tank, including removal and disposal. A 75-gallon unit, power vent model, or a job that needs venting upgrades pushes the price to $2,200 or more. We quote a flat price before we start, so you know the number up front. If you're comparing Bradford White water heater replacement company Carrollton GA options, ask whether removal, disposal, and testing are included. With us, they always are.
A new Bradford White tank lasts 10 to 14 years with annual flushing, and the manufacturer warranty covers six to ten years of that. Compared to a tank burst and water damage, the replacement pays for itself.
•affects cost
A 40-gallon Bradford White runs less than a 50-gallon, and a 75-gallon unit costs more than both. Power vent and high-efficiency models add $300 to $600 because of the blower and venting requirements.
Get a quote ↗•affects cost
Gas models cost slightly more to install because of venting, gas line work, and the leak check. Electric models are simpler but may need a dedicated circuit upgrade if your panel is older.
Get a quote ↗•affects cost
If your home needs new venting to meet NFPA 54 or an expansion tank for a closed system, that adds to the job. Older Carrollton homes near Old Downtown often need both.
Get a quote ↗•affects cost
A tank in a tight utility closet or attic takes longer to remove and install. Easy garage or basement access keeps the job in the standard price range.
Get a quote ↗ Proof you can check
Licensed, Insured, and Warrantied
- Georgia Plumbing License · Georgia State Board of Plumbing
- Manufacturer Certification (Bradford White, Rheem, A. O. Smith, Navien) · Respective manufacturers
- OSHA Safety Compliance · Occupational Safety and Health Administration
- Uniform Plumbing Code (UPC) and International Plumbing Code (IPC) Compliance · International Association of Plumbing and Mechanical Officials
Customer reviews
What Carrollton Customers Say
★★★★★
“Our Bradford White started leaking on a Friday afternoon. Called at 4 p.m. and they had a new 50-gallon tank installed by 8. Flat price, no surprises, and they hauled the old one away. The plumber tested everything and showed me the T&P valve working before he left. Hot water back the same night.”
MT
Marcus T.Homeowner, Downtown Carrollton
✓ Verified“
★★★★★
“I manage three rentals in Carrollton and needed a Bradford White replaced fast between tenants. They quoted $1,450, showed up the next morning, and finished in three hours. Clean work, no mess left behind, and they gave me the paperwork for my records. I'll use them on the next one.”
SK
Sandra K.Landlord, Hebron
✓ Verified★★★★★
“Our 12-year-old Bradford White finally rusted out. These guys explained the difference between a 40 and 50-gallon and didn't upsell me. Installed a new 50-gallon with an expansion tank since we're on a closed system. Water's hotter than it's been in years and the price matched the quote exactly.”
DR
Dwight R.Homeowner, Castle Hills
✓ VerifiedMost Bradford White replacements in Carrollton run $1,150 to $1,850 in 2026 for a standard 40 or 50-gallon tank, including removal and disposal. A 75-gallon unit or a power vent model pushes the price to $2,200 or more. Gas models cost slightly more than electric because of venting and gas line work. We quote a flat price before we start, so you know the number up front.
We do. Our licensed plumbers install Bradford White tanks across Carrollton, Carroll County, and the 30117, 30116, and 30118 ZIP codes. We're manufacturer-certified and carry 40 and 50-gallon units on the truck for same-day service. Call (943) 469-0029 and we'll confirm a window, usually the same day or next morning.
A standard swap takes two to four hours from arrival to hot water. That includes draining the old tank, setting the new Bradford White, connecting water and gas or power, and running a full test cycle. If we find corroded pipes or a venting issue, it can stretch to five or six hours. We'll tell you before we start.
Yes. A leaking tank or a total loss of hot water gets priority, including nights and weekends. We answer the phone 24/7 at (943) 469-0029. If your tank is actively leaking, shut off the water supply and the gas or power, then call. We'll get a plumber out as fast as we can, usually within a few hours.
Ready when you are
Get Your Bradford White Water Heater Replacement in Carrollton Today
Call (943) 469-0029 and we'll schedule a same-day or next-morning visit. Flat-rate pricing, licensed plumbers, and warrantied work. We serve all of Carroll County and the 30117, 30116, and 30118 ZIP codes. Don't wait on a leaking tank.
Call Now (943) 469-0029 →
Request an appointment
Call for Water Heater Help
Reach us at (943) 469-0029 any time, day or night. We answer live, ask a few questions about your tank, and get a plumber headed your way. Regular appointments run Monday through Friday, and emergency calls are covered 24/7 across Carrollton and Carroll County.
Call anytime(943) 469-0029Email the officeinfo@waterheaterreplacementcarrolltonga.xyz
Office hoursOpen 24 hours · 7 days a week